The lack of toxic aldehyde vapors results in extremely short process times—over 95% faster than some conventional systems. This means less production downtime and lower total costs. Typically, the entire process can be completed in less than 3 hours, depending upon room size and ventilation system efficiency, compared to up to 3-5 days with some conventional systems.
The Dry Fog equipment is designed to produce fine droplets that average 7.5 microns in diameter which will ensure even dispersion of the Minncare solution throughout the room. These small droplets will tend to bounce off of solid surfaces and thus avoid excessive condensation, corrosion and surface wetting issues associated with systems producing larger droplets. The small droplets evaporate and the vapor will penetrate normally inaccessible areas and lead to a more effective process.
The system is easily adaptable to differing room dimensions and configurations and can be adjusted to suit any room height. It is readily transportable and can be used in multiple locations, needing only a compressed air source to operate. It will deliver an adequate solution quantity to rooms up to 35,000ft3 (1000m3). Beyond this size, multiple machines may be required.
Minncare Cold Sterilant is a peracetic acid and hydrogen peroxide based proprietary chemistry developed by Minntech for optimized biocidal efficacy. It is registered by the EPA for use as a fog to enhance existing cleaning and disinfection process. It is fully biodegradable and will leave no measurable air residuals once the room has been fully ventilated. Minncare Cold Sterilant contains only pharmaceutical quality raw materials, limiting the introduction of any undesirable components into the clean room environment.
|
